RSS | Roulette Scripter Studio for Playtech | Live Roulette | Create your own roulette system
 

Do you want to code your own Roulette System for Playtech Live Online Roulette?

 
 

Roulette Scripter Studio first auto play software for online roulette table.

 
Roulette Scripter Studio can create any type of roulette systems based on all existing roulette elements.
 
In future to refer to Roulette Scripter Studio we will use it short name RSS.
 
RSS scripts are written in open source format and this mean the player can always share, modify or extend them.
 
With RSS the player can create any possible types of roulette systems based on all roulette elements that will include betting on: numbers, red/black, high/low, odd/even, split bets, street bets, corner bets, line bets, four bet, columns, dozens also combined elements.
 
This roulette tool represent an auto play software that will follow the commands from the script line by line and always will do all is coded into your script.
 
RSS has several important features like auto play and real time landed numbers recognize procedure.
 
Related to auto play this mean the software has set of click procedures that will allow you to write code that will click on the roulette elements you may need from your roulette table.
 
Related to numbers recognize procedure then it will look into your roulette table and will capture the part of the screen related to it and after will run recognize procedure by returning to the player the last landed number.
 
These two are one of the most important features of the roulette scripter studio.
 
Also RSS have a set of decisional and loop blocks that will allow you to create any type of structures for your own unique roulette system.
 
RSS scripting is based on Pascal syntax so in case you can have any questions related to how to code several structures then internet will give you the answer to any of the questions you can have.
 
Anyway even without internet we have our tutorial and on our forum where we just opened a new board called RSS-Coding Zone where our customers may put questions and receive answers from the other.
 

I want to tell to all that this roulette tool is not for analyze of your roulette system even if it can do this also.

It is supposed to be used to play the most complex roulette systems and this mean the single limitation is only your mind.
 
For example you can create roulette systems based on active analyze that's mean before to bet on several roulette elements RSS will analyze previous situation and will take the right decision based on your algorithm.
 
RSS can be extended without any limits via additional libraries that may be released as by our team as by our members so all the user should do is to add the new libraries to his roulette system.
 
RSS also allow several coders to work in a team while developing the most complex roulette systems.
 
People who already used scripting will find coding this tool very easy but the people who never used scripting can learn this process very easy using RSS tutorial or by asking the other users who already use it.
 
If you are professional roulette players then this roulette tool is for you but if you want to become and play like a professional then it is also for you.
 
Already have RSS installed?
Let suppose you already have RSS installed on your computer and already started it.
In this case you will see the next form that represent Roulette Scripter Studio IDE or RSS IDE.
 
As you see RSS IDE consist from 3 zones: Code Explorer, Source Explorer, Console
Code Explorer - is used to enter your script code.
Source Explorer - show all functions, procedures, units used in active script.
Console - will serve like a board that can show real time all active variables.
 

Now is the time to explain what can do this software but before this I want to present it menu.

 
File Menu is used to perform operations with files and in our cases these will be rss scripts or let say your own
roulette systems or even additional routines for your own roulette systems.
As you see from the screenshot you can create one new script or to load an already existing script from
your computer also to save it or even to save it as a new name.
 
Edit Menu is used to perform operations with your code.
As you know sometimes the code can have a lot of lines and you can need to perform copy/paste of some lines
from one function or procedure to another in order to avoid to write the same code from zero.
In the same time when your code is big you can need to search for a special code or to perform a replace procedure.
Cut, Copy, Paste- are used to operate with your script lines. The functionality is the same like in every text editor.
Find - is used to search for variable, function or procedure. The functionality is the same like in every text editor.
Replace - is used usually to change one old text with the other new . So this work like in every text editor.
 
Vew menu is used to activate or deactivate the next 3 view zones:code explorer, source explorer, console.
You can use this feature in case you will need more visibility for code explorer instead of source explorer or console.
 
Debug menu - is the most important part of this software.
It contain a lot of functionality all related to run time process.
Using this menu you can run your own script also to debug step by step your script also to check step by step how
work your script and to find most of the errors during the coding process.
Simply to say this will allow you to check and to avoid later most of the errors.
More info related to every Debug's menu function we will add later.
For now you should know that by pressing Run button you will execute your script.
 
Help menu at this time contain some functionality related to User Profile and RSS registration process.
Later we may add a quick online help but for now all the help you can find on our site.
 
Quick toolbar has a set of most used functions during the coding process.
 
Now when you have a general knowledge about this software we can start the coding process.
Before we will start I want to explain how RSS work and what RSS can do.
RSS can play Online Roulette and this mean it can bet on all roulette elements and can recognize landed numbers.
RSS don't use exe file memory or other methods that deal with memory or casino dll's to read the landed numbers.
It has several functions that works with images so it can recognize landed numbers.
 
RSS is a bridge between a normal scripter studio and online roulette table. It is based on Pascal scripting.
We also can release and Visual Basic scripting IDE for users who want to use this scripting language.
Due to the fact that RSS IDE is based on these well know scripting languages our future customers always will
be able to find tutorials and free code on the internet.
 
In the world exist more then 100 000 people who use Pascal and Visual Basic.
From our side scripting is the single way that will allow you to make any type of roulette systems.
 
In order to not understand me wrong i want to pay attention to all that RSS can interact with online roulette.
How it do this? Sure via our roulette routines embeded into RSS.
 
So after RSS IDE was started the next step is to start the online casino you want to use.
 
 
Choose Live Games->Live Roulette
 
 
and select $0.10/$15 or $1/$50 live online roulette table. After this click Join button.
 
So this is the Playtech Live Online Roulette Table.
 
Now click on SELECT ACTIVE ROULETTE WINDOW from the RSS Menu
and choose the window related to roulette table you want to use
after this click Set Active Roulette Window button.
Now all is ready and you can start to write your first script for Live Online Roulette.
 

We have in RSS a feature called Code Completition that will help you to put the proper code and to avoid mistakes.

In order to activate this feature please click Ctrl+Space in your RSS Code Explorer and a combo box with all
available procedures and functions from RSS will open.
 
Now is the time to put here all available procedures related to clicks.
By click procedures I mean the click action that usually the player do but in our case the RSS will do.
 
Like I told before RSS can perform all possible roulette table clicks.
 
*************************************************************************************
Before to continue I want to pay attention to general structure of every script for Live Online Roulette.
So for each live roulette script we will have next base structure:
1. Wait for a new round
You should know that one live roulette session is a very long session and such game is a totally different than a RNG roulette game. Here we don't have so called sessions but one very big session built from a lot of rounds and every round represent only one spin and the most important to know is that before a new round the live dealer may change. So simple to say we can start betting procedure only once a new round will be started this is why is very important to wait for it. For example if the live dealer will change then all players will wait until the new live dealer will be ready. Once the new round ready signal is sent to the players they can start put their bets and this mean that the game was started this is why is very important to know about this. RSS know how to recognize a new round automatically.
 
2. Put bets
I think this is an easy to understand step. Simple put your bets on the table.
 
3. Confirm bets
If to compare to NON Live Roulette Game then here we don't have SPIN button but several seconds when we should put all our bets and after to not forget to click on Confirm Bet button otherwise our bets will not be considered for the current round so just be very careful with this in case you want your bets to be accepted. You should not worry about this because RSS have all these things totally automated.
 
4. Wait for a new number
For betting procedure online casino usually use around 20 seconds. This is the time when the players should put their bets on the table and to not forget to click Confirm Bet button. Due to the fact that RSS do all automatically then all bets will be done in max one second so the other seconds RSS will wait the dealer to start spin procedure and finally the new landed number. This procedure is totally automated in RSS for Playtech Live Online Roulette.
 
5. After new number will land make some actions
This step will be easy to understand because here we will use the same principle like on every script.
So we got the last landed number and we are able to decide if we won or lost or others for the current active round.
 
Below I want to present you a simple script for Playtech Live Online Roulette:
print('wait f o r a new round t o start');
wait_for_new_round();
print('new round started');
print('click chip2');
click_chip2();
print('click black bet');
click_black_bet();
print('click red bet');
click_red_bet();
print('click confirm bet button');
click_confirm_bet_button();
print('wait f o r a new number t o land');
wait_for_new_number();
print('Landed number '+IntToStr(get_last_landed_number()));
 
Let me I will explain what will do the script presented above. It will wait for a new round and after will click on chip2, on black, on red and will confirm bets. After this it will wait for a new landed number and will show it in RSS Console.
 
I don't want to say that this script does something very special but at least it show the main structure on which from now will be based any of your scripts made for Playtech Live Online Roulette.
 
As you see the script is based on the scheme presented above:
I want to mention some new procedures like: wait_for_new_round(); click_confirm_bet_button(); wait_for_new_number();
So all is very simple if you made some code before with RSS for RNG Roulette but you should take care in your code on the rules use Playtech Live Online Roulette. I mean to start betting only once a new round is anounced, after all bets was made to not forget to confirm them and after to wait for a new number to land.
 
If you want to know the last landed number then the function do this is next: get_last_landed_number();
 
As you know the roulette game consist in betting money on roulette elements.

To do this on every roulette table exist chips and every chip has it own value.

In our case we have 7 chips with the next values:0.01, 0.1, 0.5, 1, 5, 10, 25
So chip1=0.01, chip2=0.1, chip3=0.5, chip4=1, chip5=5, chip6=10, chip7=25
Please use the next procedures in dependence of the amount you want to bet on every roulette element.

click_chip1();
click_chip2();
click_chip3();
click_chip4();
click_chip5();
click_chip6();
click_chip7();

So what we do in a real game situation?
We click on the chip value we want to use.
After we click on the roulette element we want to bet this amount and after press spin button.
I our case for Live Roulette instead of Spin button all we should do is to click on Confirm Bet button.
 
Below I want to present you all available procedures in Roulette Scripter Studio for Playtech Live Online Roulette
 
If you want to bet on numbers then please use the next procedures:
click_straight_up_bet_0();
click_straight_up_bet_1();
click_straight_up_bet_2();
click_straight_up_bet_3();
click_straight_up_bet_4();
click_straight_up_bet_5();
click_straight_up_bet_6();
click_straight_up_bet_7();
click_straight_up_bet_8();
click_straight_up_bet_9();
click_straight_up_bet_10();
click_straight_up_bet_11();
click_straight_up_bet_12();
click_straight_up_bet_13();
click_straight_up_bet_14();
click_straight_up_bet_15();
click_straight_up_bet_16();
click_straight_up_bet_17();
click_straight_up_bet_18();
click_straight_up_bet_19();
click_straight_up_bet_20();
click_straight_up_bet_21();
click_straight_up_bet_22();
click_straight_up_bet_23();
click_straight_up_bet_24();
click_straight_up_bet_25();
click_straight_up_bet_26();
click_straight_up_bet_27();
click_straight_up_bet_28();
click_straight_up_bet_29();
click_straight_up_bet_30();
click_straight_up_bet_31();
click_straight_up_bet_32();
click_straight_up_bet_33();
click_straight_up_bet_34();
click_straight_up_bet_35();
click_straight_up_bet_36();
 

If you want to use split bets then please use the next procedures:

click_split_bet_0_2();
click_split_bet_0_3();
click_split_bet_1_2();
click_split_bet_2_3();
click_split_bet_1_4();
click_split_bet_2_5();
click_split_bet_3_6();
click_split_bet_4_5();
click_split_bet_5_6();
click_split_bet_4_7();
click_split_bet_5_8();
click_split_bet_6_9();
click_split_bet_7_8();
click_split_bet_8_9();
click_split_bet_7_10();
click_split_bet_8_11();
click_split_bet_9_12();
click_split_bet_10_11();
click_split_bet_11_12();
click_split_bet_10_13();
click_split_bet_11_14();
click_split_bet_12_15();
click_split_bet_13_14();
click_split_bet_14_15();
click_split_bet_13_16();
click_split_bet_14_17();
click_split_bet_15_18();
click_split_bet_16_17();
click_split_bet_17_18();
click_split_bet_16_19();
click_split_bet_17_20();
click_split_bet_18_21();
click_split_bet_19_20();
click_split_bet_20_21();
click_split_bet_19_22();
click_split_bet_20_23();
click_split_bet_21_24();
click_split_bet_22_23();
click_split_bet_23_24();
click_split_bet_22_25();
click_split_bet_23_26();
click_split_bet_24_27();
click_split_bet_25_26();
click_split_bet_26_27();
click_split_bet_25_28();
click_split_bet_26_29();
click_split_bet_27_30();
click_split_bet_28_29();
click_split_bet_29_30();
click_split_bet_28_31();
click_split_bet_29_32();
click_split_bet_30_33();
click_split_bet_31_32();
click_split_bet_32_33();
click_split_bet_31_34();
click_split_bet_32_35();
click_split_bet_33_36();
click_split_bet_34_35();
click_split_bet_35_36();
 

For Street Bets please use the next procedures:

click_street_bet_0_1_2();
click_street_bet_0_2_3();
click_street_bet_1_2_3();
click_street_bet_4_5_6();
click_street_bet_7_8_9();
click_street_bet_10_11_12();
click_street_bet_13_14_15();
click_street_bet_16_17_18();
click_street_bet_19_20_21();
click_street_bet_22_23_24();
click_street_bet_25_26_27();
click_street_bet_28_29_30();
click_street_bet_31_32_33();
click_street_bet_34_35_36();
 

For Corner Bets please use the next procedures:

click_corner_bet_1_2_4_5();
click_corner_bet_2_3_5_6();
click_corner_bet_4_5_7_8();
click_corner_bet_5_6_8_9();
click_corner_bet_7_8_10_11();
click_corner_bet_8_9_11_12();
click_corner_bet_10_11_13_14();
click_corner_bet_11_12_14_15();
click_corner_bet_13_14_16_17();
click_corner_bet_14_15_17_18();
click_corner_bet_16_17_19_20();
click_corner_bet_17_18_20_21();
click_corner_bet_19_20_22_23();
click_corner_bet_20_21_23_24();
click_corner_bet_22_23_25_26();
click_corner_bet_23_24_26_27();
click_corner_bet_25_26_28_29();
click_corner_bet_26_27_29_30();
click_corner_bet_28_29_31_32();
click_corner_bet_29_30_32_33();
click_corner_bet_31_32_34_35();
click_corner_bet_32_33_35_36();
 

For Line Bets please use the next procedures:

click_line_bet_1_2_3_4_5_6();
click_line_bet_4_5_6_7_8_9();
click_line_bet_7_8_9_10_11_12();
click_line_bet_10_11_12_13_14_15();
click_line_bet_13_14_15_16_17_18();
click_line_bet_16_17_18_19_20_21();
click_line_bet_19_20_21_22_23_24();
click_line_bet_22_23_24_25_26_27();
click_line_bet_25_26_27_28_29_30();
click_line_bet_28_29_30_31_32_33();
click_line_bet_31_32_33_34_35_36();
 

For four bet please use the next procedure:

click_four_bet();
 

For Dozen Bets please use the next procedures:

click_first_dozen_bet();
click_second_dozen_bet();
click_third_dozen_bet();
 

For Columns Bets please use the next procedures:

click_first_column_bet();
click_second_column_bet();
click_third_column_bet();
 

For Low/High bets please use the next procedures:

click_low_bet();
click_high_bet();
 

For Odd/Even bets please use the next procedures:

click_even_bet();
click_odd_bet();
 

For Black/Red bets please use the next procedures:

click_black_bet();
click_red_bet();
 
Copyright © 2007-2011, All rights reserved to Money Maker Machine